...-24 bases 40-60% G/C content Start and end with 1-2 G/C pairs Melting temperature (Tm) of 50-60°C Primer... Protocols Designing Primers How to Design a Primer You may also like...Tips on designing primers for PCR Protocols...Cloning by PCR Agarose Gel Electrophoresis Primer Design for PCR Oligonucleotide primers are necessary when... when running a PCR reaction. One needs to design primers that are complementary to the template region.... They are synthesized chemically by joining nucleotides together. One must selectively block and unblock... the primer usually has stretches of several nucleotides. Also, both of the 3’ ends of the hybridized ...

...PCR tube Ice Bucket 2 μL Template DNA (10 ng-500 ng) 5 μl 10X Taq buffer with MgCl 2 1 μl dNTP mix (10 ... reagents on ice): 2 μL Template DNA (10 ng-500 ng) 5 μl 10X Taq buffer with MgCl 2 1 μl dNTP mix (10 ...normally sterile dH 2 O. To make a 100uM stock of any primer, add a number of µl of dH 2 O equal to the number...annealing temperature step-wise by 1-2°C. The rate of DNA synthesis is ~1-2 kb/min. The extension time can ...work adequately. Divalent cations such as Mg 2+ and Mn 2+ stabilize the buffer solution. These cations...Sterile dH 2 O 0.2 μL Taq DNA Polymerase (5 units/μL) PCR Machine Agarose Gel Procedure Primer Design and PCR...PCR to work efficiently. Taq Buffer with MgCl 2 : Provides an optimal and stable chemical environment for...

...worn outside of the BSL-2 area. BSL-2 laboratories must be clearly marked as “BSL-2.” The names and contact...protocol provides information for both biosafety level 1 (BSL-1) and biosafety level 2 (BSL-2). The purpose...in addition to BSL-2 guidelines below, including PPE protocols . Working in a BSL-2 laboratory requires...Staphylococcus aureus or Vibrio cholerae . BSL-2 includes all of the precautions needed in BSL-1, along...pouring down the drain. Solid BSL-2 waste can be collected in designated biohazardous waste containers that... steps to ensure you are working in BSL-1 and BSL-2 labs safely. Protocols... Biosafety Levels One and Two (BSL-1 and BSL-2) Intro to the Lab Bench Check out more protocols and videos...

...materials D.2 Screening for inserts E. Producing Lentiviral Particles E.1 Recommended materials E.2 Protocol...Published articles H.2 Web resources I. Appendix I.1 Sequence of pLKO.1 TRC-Cloning Vector I.2 Recipes I.3 Warranty...VWR: #7177-48-2. Use at 100 μg/mL. Carbenicillin VWR: #80030-956. Use at 100 μg/mL. C.2 Annealing Oligos...oligo 5 μL Reverse oligo 5 μL 10x NEB buffer 2 35 μL ddH 2 O Incubate for 4 minutes at 95°C in a PCR machine...buffer 1 1 μL AgeI add ddH 2 O to bring to 50 μL final volume Incubate at 37°C for 2 hours. Purify with Qiaquick...buffer for EcoRI 1 μL EcoRI 14 μL ddH 2 O Incubate at 37°C for 2 hours. Run digested DNA on 0.8% low melting... For a standard T4 ligation, mix: 2 μL annealed oligo from step C.2 20 ng digested pLKO.1 TRC-cloning ...

...phosphate monobasic monohydrate (NaH 2 PO 4 ∙H 2 O), pH 7.0 138 g NaH 2 PO 4 ∙H 2 O 1 L deionized water Adjust...sodium phosphate dibasic (NaH 2 PO 4 ), pH 7.0 142 g of NaH 2 PO 4 ∙H 2 O 1 L deionized water Adjust pH...monobasic monohydrate (NaH 2 PO 4 ∙H 2 O) 610 mL of sterile sodium phosphate dibasic (NaH 2 PO 4 ) Store up to...recombinant antibody. Section 2: Buffer exchange Choose Option 1 or Option 2 based on the concentration ... mL , then divide it into 2 columns. Twist off the 10 mL Zeba Spin Desalting Column’s bottom closure and...antibodies. Workflow Timeline Day 1: Purify antibody Day 2 or later: Buffer exchange Equipment Class II, Type...conical tubes NanoDrop spectrophotometer 37 °C, 5% CO 2 incubator with shaking platform set to 120 rpm 37 ...

...430825, 175 cm 2 Cellstack 5, Corning 3319, 3180 cm 2 Cellstack 2, Corning 3269, 1272 cm 2 Heat-inactivated...: 50 mM Tris HCl, 150 mM NaCl, 2 mM MgCl 2 Add the following to the 2 L sterile bottle: 1836 mL deionized... solution can be stored at 4 °C for up to 2 months. After 2 months, discard the tube and thaw a new working... mL of PBS. Aspirate PBS and add 2 mL of 0.05% Trypsin/EDTA. Wait ~2 min. Neutralize trypsin by adding...0.05% Trypsin/EDTA. Wait ~2-3 minutes for cells to detach. Gently tap the sides of the CS2 to help detach...Cell-Stack (CS5) (Link opens in a new window) (3,180 cm 2 - the same surface area as 21 x T-175 flasks). Cell...flasks. Workflow Timeline Day 0: Seed cells in CS2 Day 2: Seed cells in CS5 Day 3 (am): Transfect cells Day...

... 10 90 2 x 10 8 10 of 2 x 10 8 dilution 90 2 x 10 7 10 of 2 x 10 7 dilution 90 2 x 10 6 10 of 2 x 10 6...6 dilution 90 2 x 10 5 10 of 2 x 10 5 dilution 90 2 x 10 4 10 of 2 x 10 4 dilution 90 2 x 10 3 Pro-Tip...molecules/μL To obtain a solution at 2 x 10 9 molecules/μL: 1.59 x 10 11 / 2 x 10 9 = 79.8X dilution ...your standard curve plasmid (2 x 10 9 stock made in step #1): Volume of 2 x 10 9 stock or previous dilution...stock 45 uL 10X 10X Dilution 2 5 uL Dil. 1 95 uL 20X 200X Dilution 3 20 uL Dil. 2 80 uL 5X 1000X Dilution ...time required: ~3 h Workflow Timeline Plate set-up: 2 h qPCR run: 1.5 h Data analysis: 30 min Equipment ...single channel pipette 1–10 µL multichannel pipette 2–50 µL multichannel pipette 20–200 µL multichannel ...

...protocol provides information for both biosafety level 1 (BSL-1) and biosafety level 2 (BSL-2). The BSL...potential accidents such as spills. BSL-2 is different because it includes labs that work with agents associated...associated with diseases in healthy humans. BSL-2 includes all of the precautions needed in BSL-1, however...BSL-1 and BSL-2 labs. Protocols... Protocols Personal Protective Equipment (PPE) for BSL-1 and BSL-2 Labs Personal ...Personal Protective Equipment (PPE) for BSL-1 and BSL-2 Labs Intro to the Lab Bench Check out more protocols ...and/or face shields can be used as needed. For BSL-2 work always wear glasses/goggles in addition to the...

... solution can be stored at 4 °C for up to 2 months. After 2 months, discard the tube and thaw a new working... transfected using 1:1, 1:2, 1:3 and 1:6 µg of pRosetta :µg of PEI. The 1:2 and 1:3 ratios provided high... for viral production) Day 1: Transfect Cells Day 2 (am): 18 h post transfection - Remove media, replace...Biological Safety Cabinet 0.5–10 µL single channel pipette 2–20 µL single channel pipette 20–200 µL single channel... 200–1000 µL single channel pipette Ice bucket CO 2 incubator Pipet controller Hazardous waste container... use. Thawed aliquots should be discarded after 1–2 months. 1 mg/mL polyethylenimine, linear MW 25,000...times a week: Monday: Plate 1x10 6 cells in a 75 cm 2 flask in a volume of 15 mL. Wednesday: Plate 1x10 ...

...Activation 95 10 2 1 Denaturation 94 0.5 2 40 Annealing/Extension 60 1 2 40 Enzyme Deactivation 98 10 2 1 Hold ...diploid cells, thus the reason for multiplying by 2. $$V = 2*{copies\ RRE \over copies\ RPP30}$$ Use the viruses...diluted 2-fold serially, the concentration of RRE positive droplets should decrease by a factor of 2 across...Lentivirus is generally considered biosafety level 2+. Please ensure that you are in compliance with your...channel pipette 200–1000 µL single channel pipette 2–50 µL multichannel pipette 20–200 µL multichannel ...Detach cells by incubating with 200 µL TrypLE for 1–2 min. Resuspend cells in 500 µL DMEM complete and transfer... DG8 cartridge into the cartridge holder. Using a 2–50 µL multichannel pipet, load 20 µL of the reaction...

... solution can be stored at 4 °C for up to 2 months. After 2 months, discard the tube and thaw a new working...μg total DNA to μg PEI ratios of 1:1, 1:2, 1:3 and 1:6. The 1:2 and 1:3 total DNA:PEI μg ratios provided...packaging cells Day 1 (pm): Transfect packaging cells Day 2 (am): 18 h post-transfection. Remove media, replace...Biological Safety Cabinet 0.5–10 µL single channel pipette 2–20 µL single channel pipette 20–200 µL single channel... 200–1000 µL single channel pipette Ice bucket CO 2 incubator Pipet controller Hazardous waste container...culture plates. Incubate the cells at 37 °C, 5% CO 2 for ~20 h. Prepare a mixture of the three transfection...plasmid using a variety of ratios. Check the cells 1-2 days after transfection to determine what ratio gives...

... 95 10 2 1 Denaturation 95 0.5 2 50 Annealing/Extension 60 1 2 50 Signal Stabilization 98 10 2 1 Hold ...should decrease by a factor of 2 across the dilutions. In the example below, 2-fold serial dilutions of a ... considered biosafety level 1 but may require BSL-2 handling depending on the insert. Please ensure that...single channel pipette 1–10 µL multichannel pipette 2–50 µL multichannel pipette 20–200 µL multichannel ...20X): 5 µL in 95 µL 1X PCR buffer (1:20) Dilution 2 (20X): 5 µL in 95 µL 1X PCR buffer (1:400) Dilution... DG8 cartridge into the cartridge holder. Using a 2–50 µL multichannel pipet, load 20 µL of the reaction...Hold 4 ∞ 2 1 After PCR is complete, transfer the plate to the Droplet Reader. Open the QuantaSoft software...

...surface of the iBlot 2 Gel Transfer Device. Close the lid of the device. Select the desired method and make...transfer, block, incubate with primary antibody Day 2: Incubate with secondary antibody Video Watch this... Microcentrifuge 0.5–10 µL single channel pipette 2–20 µL single channel pipette 20–200 µL single channel...Heat block Mini gel tank chamber Power supply iBlot 2 Gel Transfer Device Roller Spatula Platform shaker...running buffer Prestained protein ladder Ethanol iBlot 2 PVDF Mini Stack, Thermo Fisher IB24002 20X TBS Tween...immediately or store at -80 °C until ready to use. Section 2: Determine the total protein concentration and prepare...in deionized water. To prepare 20% ethanol, dilute 2 mL of ethanol into 8 mL of deionized water and mix...

...purification. Workflow Timeline Day 1: Purify Day 2: Buffer exchange and concentration Note: Both steps... 7.4 1X PBS-MK buffer 100X Pluronic-F68 NaCl MgCl 2 KCl Centrifugal filter units (MWCO 100 kDa) Reagent...PBS-MK buffer Dissolve 5.84 g of NaCl, 26.3 mg of MgCl 2 and 14.91 mg of KCl in 1× PBS in a final volume of...at 4 °C. 1X PBS-MK buffer Dissolve 26.3 mg of MgCl 2 , and 14.91 mg of KCl in 1× PBS in a final volume ...(C) (formulation buffer) Add 5 mL of Buffer B and 2 mL of 5 M NaCl to 43 mL PBS Procedure Preparation ...need more time, you can alternatively centrifuge for 2 h at 200,000 x g at 18 °C. Carefully take the QuickSeal...interface of the 60% and 40% gradient (see Figure 2) with an 18 ga needle. Place the first microcentrifuge...

... Anti-Desmin [D7]. Plates were incubated with HRP-linked anti-Human IgG secondary antibody for 2 hours...vapors. Workflow Timeline Day 1: Antigen Coating Day 2: Blocking Day 3: Primary antibody incubation Day 4...with 96-well plates 1–10 µL single channel pipette 2–20 µL single channel pipette 20–200 µL single channel...serial dilutions of the purified antigen as follows: 2 ng/µL : Add 100 µL of 20 ng/µL stock into 900 µL PBS...microfuge tube and vortex. 1 ng/µL : Add 450 µL of 2 ng/µL stock into 450 uL PBS in a microfuge tube and...37 °C for 30 min , or overnight at 4 °C . Section 2: Block the plate Prepare the wash buffer (0.05% Tween...incubate on a microplate shaker set to 400 rpm for 2 h at room temperature or overnight at 4 °C . Section...

...follows: Figure 2 Using the box tool, draw a box around the entire first gel lane (as in Figure 2). Select Analyze... Example for AR0018 (lane 2 in Figure 1): Sample Peak 1 (contaminant) Peak 2 (contaminant) Peak 3 (HC)...choose Use Equation . Select the Show R 2 checkbox. Pro-Tip The R 2 of the trendline should be between 0.95...Equipment Heat block 1–10 µL single channel pipette 2–20 µL single channel pipette 20–200 µL single channel... Add 5 µL of 4X sample buffer to each sample. Add 2 µL 10X reducing agent to each sample. Spin the sample...bottom part of the gel where dye is visible. Section 2: Staining the Gel Place the gel in a plastic tray .... Figure 1 Recombinant antibody preps should have 2 clear bands at ~50 kDa and ~25 kDa corresponding to...

...method 1) or the volume of virus (method 2): Method 1 Method 2 $$T = {N*F*D\over V_T}$$ Where: T = Titer...Lentivirus is generally considered biosafety level 2+. Please ensure that you are in compliance with your...Day 0: Seed 293T cells Day 1: Transduce cells Day 2 (am): Remove media, replace with fresh media Day 4...Biological Safety Cabinet 0.5–10 µL single channel pipette 2–20 µL single channel pipette 20–200 µL single channel... 200–1000 µL single channel pipette Ice bucket CO 2 incubator Pipet controller Hazardous waste container...complete. Mix well by pipetting or inverting. Aliquot 2 mL of cell suspension into each well of the 6-well...for Lentivirus You may also like... Viral Vector Guides Virus Blog Posts Mol Bio Protocols Viral Service...

... glacial acetic acid 57 mL of dH 2 O Store Solution III at 4°C Grow 2 mL overnight cultures from single...Resuspension buffer Denaturing solution Renaturing solution 2 mg/mL RNase A TE or water-saturated phenol-chloroform...100 μL of cold Solution I. Vortex the solution for 2 min or until all bacteria are fully resuspended. Add...pipetting or carefully pouring. Optional: Add 5 μL of 2 mg/mL RNase A to the supernatant in the new tube and... to the recovered aqueous DNA layer. Repeat steps 2-4. Note: Phenol-chloroform is a hazardous waste - ...: Ethanol Precipitation To your DNA solution, add 2-2.5 volumes 95% or 100% ethanol and 1/10 volume of...Last Update: Feb. 8, 2018 Equipment Desktop microcentrifuge Desktop vortexer Vacuum (optional) Reagents...

...Warnings HEK293 cells are considered biosafety level 2. Please ensure that you are in compliance with your... 18, 2022 Workflow Timeline Day 1: Seed cells Day 2: Transfect cells Day 3-6: Feed cells Day 7: Harvest...conical tubes Automated cell counter 37 °C, 5% CO 2 incubator with shaking platform set to 120 rpm 37 ...250 mg Benzamidine 25 mL Aprotinin saline solution (2 mg/mL) Mix well and sterilize through a 0.2 µm PES... a 500 mL vented flask.Incubate in a 37 °C, 5% CO 2 incubator on a shaking platform set to 120 rpm. Pro-Tip... not use cells that are over 30 passages. Section 2: Transfection Check the cell density and viability...the culture. Pro-Tip Culture should be between 1.5–2 x 10 6 cells/mL with >95% viability to proceed with...

...BSL-1 and BSL-2 Labs Learn how to best protect yourself when working in BSL-1 and BSL-2 labs Watch the...Two (BSL-1 and BSL-2) Safety measures for laboratories operating at BSL-1 and BSL-2 Watch the Video! Water...gel Watch the Video! How to Design a Primer Key considerations when designing primers Watch the Video! Sequence...Intro to the Lab Bench Introductory techniques designed to help you get started in the lab. Basic Molecular...antibody applications. Intro to the Lab Bench Name Description (Link opens in a new window) Link to Video Personal...materials on a balance Basic Molecular Biology Name Description (Link opens in a new window) Link to Video Making...without a commercial kit Plasmid Cloning Name Description (Link opens in a new window) Link to Video Restriction...